Spacing tape Available for

Plastic Letters
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Channel Letters
Copper Letters
Minnesota Letters
Stainless Steel Letters



1) Masking Tape
2) Level
3) Tube of Silicone


1) Spacing tape comes premarked for exact letter spacing. All you have to do is mount the tape on the wall level and you fit your letters between the spacing. Take out one sign at a time and lay them out letter by letter.



2. Position the spacing tape on the wall and secure one end with masking tape. Unroll, level and tape the other end. Spacing tapes show the general position of each letter and are available free upon request for the letter types noted above.


3) Apply 100% pure silicone to each pad.



4) Apply letters to wall within the premarked guidelines. Then take a level to make sure the letters are level and straight and apply masking tape to help hold them up while the silicone dries.


How to avoid common INSTALLATION problems

  • Clean surface thoroughly before using 100% silicone.
  • Check letter orientation to avoid upside down characters.
  • Use only top quality materials (silicone, tape, etc.).

Other installation methods