Rustic Hot Rolled Steel Symbols - Circles & Squares


Size:
FREE Installation Pattern

  • Description
  • Colors
  • Font List

Cor-Ten Metal Letters and Numbers Ideal for use on ranches, farms, restaurants or any location that requires an rustic or weathered look. The finish on these sign letters is designed to rust over time and will continue to change over the life of the sign depending on the location and climate. The statuary and antique finishes have a very light clear coat to protect them during shipping and installation but will wear off very quickly to allow for more rusting. All rustic hot rolled steel letters are water jet cut. We can also produce custom fonts and logos. Rustic steel letters are easy to install with studs and an installation pattern, showing you precisely where to drill your mounting holes.

Note: Rustic hot rolled steel letters will rust over time and may bleed onto the installation surface.

People who viewed this item also viewed
Bronze Letters
Copper Letters
Aluminum Letters
Colors

Rustic Hot Rolled Steel Finishes              Click on Finish For Larger Sample.

Shipping Info
Mounting Options
No installation method will leave the back of your letter completely flat. To use this method, apply 100% silicone to the back of the letter and secure the letter to the wall. Use masking tape on the face of the letter to hold it to the wall while the silicone dries. Plain No Installation Method
This method is the most popular and secure method available. Installation patterns available and highly recommended for easy install. Simply drill holes, fill with 100% pure silicone and slide in letters. The stud for brick option is available for standard brick with mortar joints at 2 5/8' on center. Stud Mounting / Brick / Inline
Stud mount with nuts can be used in many ways. If you can access the wall behind the letters, you can use the nuts behind the wall to secure the letters. Also, if you have a corrugated building you can use the nuts on the studs to stand the letters off the wall in the low spots. Use Stud mount with Spacers (see below) for flat non corrugated walls if you want the letters to standoff the wall surface. Stud Mount With Nuts
Stud mount with spacers will allow the letters to standoff the wall surface either 1/4', 1/2' or 3/4'. The spacers are sleeves that slide over the stud not allowing the letter to go flush against the wall. This is the easiest method to get an even standoff. Use Stud mount with nuts (see above)for corrugated mounting surfaces. Stud Mount with Spacers