Installation

FREE Patterns for Professional installations. Computer Generated Installation
patterns for all stud mounting methods. Tape the installation pattern to the mounting surface,
all the stud mounting holes locations are marked. Mounting locations are then drilled
and filled with adhesive. Install studs into back of letters and install. 

Automatically Added at Checkout

Patterns are available for Mounting Methods:

• Stud
• Stud For BrickStud Mount Inline
• Stud Mount with NutsStud Mount Inline
  
• Stud With Spacers

Free Stencil Guides Stencil is a computer-generated full-size cutout designed for smaller letters, logos, or bars. Typically used to install double face tape mounted letters.
The guide is taped to the wall and letters are set inside the cutout and placed on the wall.  

Material: Cardboard

Automatically Added at Checkout

Free Spilt Stencil This stencil guide is a partial cutout of the bottom portion of the letters about the baseline, plus 2 inches below the baseline which provides a perfect way to install plain, pad, or double face tape mounted flat cut letters.
Rigid Spilt Stencil is generated using the same file that we use to produce your letters. The Gemini Layout Team will determine if Stencil or Spilt Stencil is best for your order.  

Material: Cardboard

Automatically Added at Checkout

Installation & Maintenance

• Mounting Options
• Installation Videos
• Installation Instructions
• Installation Templates
• Installation Supplies
• Technical Download
• Metal Specifications
• Plastic Specifications

Installation Method: Stud for Brick
Stud for brick is a great option to choose for brick applications. Studs are placed
behind the letters to line up with the mortar joints of the brick wall. Installation patterns
are available and highly recommended for this installation method. This Method is only
available for standard brick with mortar joints at 2 5/8'' on center.
Studs are randomly placed, patterns are needed for each set of letters ordered.

Available for:
Plastic Letters
Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Cast Letters
Copper Letters
Minnesota Letters
Stainless Steel Letters

(Installation Pattern On A Standard Size Brick Wall)

Click here to view text & picture demonstration

Installation Method: Pad Mounting 

Great easy to apply option method of installation. One of the most common ways
to install letters. Simply line up letters on the spacing tape, apply 100% pure silicone to 
letters and apply to wall.

Available for:
Plastic Letters
Acrylic Letters
Minnesota Letters

Installation Method: Stud Pad Combo

Great for corrugated buildings or walls. This installation method combines studs and pads
to leave the letter across uneven surfaces. Installation patters are Available and highly 
recommended for this installation method. Simply apply the pattern to cardboard and 
level against the wall. Then drill where the studs are marked, adjust pads and studs to 
fit the wall appropriately, fill holes with 100% pure silicone and apply the letters. 
Studs are randomly placed, patterns are needed for each set of letters ordered 

Available for:
Plastic Letters
Acrylic Letters
Minnesota Letters

Installation Method: Stud Mount With Nuts
Stud mount with nuts can be used in many ways. If you can access the wall behind the
letters you can use the nuts behind the wall to secure the letters. Also, if you have a 
corrugated balding you can use the nuts on the studs to stand the letters off the wall in
the low spots. Use Stud mount with spacers for for flat non corrugated walls. Studs are 
randomly placed, patterns are needed for each set of letters ordered

Available for:

Acrylic Letters
Aluminum Letters
Brass Letters
Bronze Letters
Copper Letters
Stainless Steel Letters
Cast Aluminum Letters
Cast Bronze Letters

 
(Stud Mounting With Nuts)

Installation Method: Changeable Letters
Changeable letter track is easy to install. Simply Drill oblong holes approx. 8" apart and use stainless
steel screws or rivets to attach the track to the sign. Do not tighten the screws leave approx. 
1/4 to a 1/2 turn loose so that the sign has room to expand and contract with temperature changes.

Available for:
Changeable Letters

Click here for track installation instructions

More Mounting Methods Available

How to Use / Install PDF's