Size and Price:

  • Description
  • Colors
  • Font List

Brass Sign Letters Numbers & Logos are available for interior and exterior use. Brass lettering is made from high grade C280 brass that provides an impressive and elegant look to your office or home. Brass signs are powder clear coated so they won't tarnish.  1/4" to 3/4"  thicknesses. Let us waterjet cut custom Logos and type styles to match your existing signage. Brass Letters, numbers and logos are easy to install with studs and an installation pattern, showing you precisely where to drill your mounting holes.

Authorized Gemini Sign Letter Supplier Since 2001
Gemini Brass Letters come with a Lifetime Guarantee and are made in the USA.

Upload your Image

People who viewed this item also viewed
Simulated Brass Letters
Brass Mini Letters
Cast Bronze Letters
Bronze Letters

Brass Colors            Click on color for larger image.

<div >

Dark Oxidized
Shipping Info
Mounting Options
No installation method will leave the back of your letter completely flat. To use this method, apply 100% silicone to the back of the letter and secure the letter to the wall. Use masking tape on the face of the letter to hold it to the wall while the silicone dries. Plain No Installation Method
This method is the most popular and secure method available. Installation patterns available and highly recommended for easy install. Simply drill holes, fill with 100% pure silicone and slide in letters. The stud for brick option is available for standard brick with mortar joints at 2 5/8' on center. Stud Mounting / Brick / Inline
Stud mount with nuts can be used in many ways. If you can access the wall behind the letters, you can use the nuts behind the wall to secure the letters. Also, if you have a corrugated building you can use the nuts on the studs to stand the letters off the wall in the low spots. Use Stud mount with Spacers (see below) for flat non corrugated walls if you want the letters to standoff the wall surface. Stud Mount With Nuts
Stud mount with spacers will allow the letters to standoff the wall surface either 1/4', 1/2' or 3/4'. The spacers are sleeves that slide over the stud not allowing the letter to go flush against the wall. This is the easiest method to get an even standoff. Use Stud mount with nuts (see above)for corrugated mounting surfaces. Stud Mount with Spacers