Colors

Aluminum Colors 
Click on color for bigger picture.

5687 White
4310 Dove Grey
0209 Grey
2025 Black
2718 Opaque Ivory
0207 Beige
4660 Desert Sand
2000 Yellow
2037 Lemon Yellow
0217 Citrus Yellow
0218 Sundance Yellow
0254 School Bus Yellow
2119 Orange
2662 Red-Orange
0256 Rampart Orange
2793 Red
0214 Mexicali Red
2240 Maroon
2410 Magenta
2287 Purple
0246 Violet Toner
2050 Dark Blue
2860 Medium Blue
3000 Blue
2648 Light Blue
3210 Teal Blue
2108 Light Green
3555 Spring Green
0222 Emerald Green
2030 Green
0259 Federal Green
6371 Yellow Brilliant Gold
2756 Metallic Gold
0401 Aztec Gold
6366 Copper
0402 Aztec Copper
0312 Medium Bronze
0314 Old Copper
3130 Duranodic Bronze
8886 Metallic Silver
2767 Midnight Blue
5425 Marine Reef Blue
2418 Brown
2162 Hunter Green
Specifications
Shipping Info
Mounting Options
No installation method will leave the back of your letter completely flat. To use this method, apply 100% silicone to the back of the letter and secure the letter to the wall. Use masking tape on the face of the letter to hold it to the wall while the silicone dries. Plain No Installation Method
This method is the most popular and secure method available. Installation patterns available and highly recommended for easy install. Simply drill holes, fill with 100% pure silicone and slide in letters. The stud for brick option is available for standard brick with mortar joints at 2 5/8' on center. Stud Mounting / Brick / Inline
Stud mount with nuts can be used in many ways. If you can access the wall behind the letters, you can use the nuts behind the wall to secure the letters. Also, if you have a corrugated building you can use the nuts on the studs to stand the letters off the wall in the low spots. Use Stud mount with Spacers (see below) for flat non corrugated walls if you want the letters to standoff the wall surface. Stud Mount With Nuts
Stud mount with spacers will allow the letters to standoff the wall surface either 1/4', 1/2' or 3/4'. The spacers are sleeves that slide over the stud not allowing the letter to go flush against the wall. This is the easiest method to get an even standoff. Use Stud mount with nuts (see above)for corrugated mounting surfaces. Stud Mount with Spacers